D-Link 3312SR Reference Manual - Page 218

To enable the SNTP function: DGS-3312SR Layer 3 Gigabit Switch DGS-3312SR:4#enable sntp Command: enable sntp Success. DGS-3312SR:4# disable sntp Purpose Syntax Description Parameters Restrictions Disables SNTP server support. disable sntp This will disable SNTP support. SNTP service must be separately configured (see config sntp). None. Only administrator-level users can issue this command. Example: To stop SNTP support: DGS-3312SR:4#disable sntp Command: disable sntp Success. DGS-3312SR:4# config time Purpose Syntax Description Parameters Restrictions Example usage: Used to manually configure system time and date settings. config time date This will configure the system time and date settings. These will be overridden if SNTP is configured and enabled. date - Express the date using two numerical characters for the day of the month, three alphabetical characters for the name of the month, and four numerical characters for the year. For example: 03aug2003. time - Express the system time using the format hh:mm:ss, that is, two numerical characters each for the hour using a 24-hour clock, the minute and second. For example: 19:42:30. Only administrator-level users can issue this command. Manually configured system time and date settings are overridden if SNTP support is enabled. 212