D-Link 3312SR Reference Manual - Page 163
show authen server_group, config authen parameter response_timeout
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
DGS-3312SR Layer 3 Gigabit Switch To delete the server group "group_1": DGS-3312SR:4#delete server_group group_1 Command: delete server_group group_1 Success. DGS-3312SR:4# show authen server_group Purpose Used to view authentication server groups on the switch. Syntax show authen server_group Description This command will display authentication server groups currently configured on the switch. This command will display the following fields: Group Name: The name of the server group currently configured on the switch, including built in groups and user defined groups. IP Address: The IP address of the server host. Protocol: The authentication protocol used by the server host. Parameters - Enter an alphanumeric string of up to 15 characters to define the previously created server group the user wishes to view. Entering this command without the parameter will display all authentication server groups on the switch. Restrictions None. DGS-3312SR:4#show authen server_group Command: show authen server_group Group Name Darren tacacs tacacs+ xtacacs IP Address 10.53.13.2 10.53.13.94 (This group has no entry) (This group has no entry) Protocol -------TACACS TACACS Total Entries : 4 DGS-3312SR:4# config authen parameter response_timeout Purpose Used to configure the amount of time the switch will wait for a user to enter authentication before timing out. 157
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/163.png)