D-Link 3312SR Reference Manual - Page 204
show stacking, Do you want to save the new system configuration to NV-RAM and restart
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
Usage Example DGS-3312SR Layer 3 Gigabit Switch To globally enable stacking: DGS-3312SR:4#config stacking mode enable Command: config stacking mode enable The new stacking mode configuration must be saved and the system restarted to put the new settings into effect. If you do not save the changes now,they will be lost. Do you want to save the new system configuration to NV-RAM and restart now?(y/n) It is necessary to save the stacking mode settings and restart the system. If you want to save and restart press Y. It will take a few minutes for the system to reboot. It is also possible to use any of the built-in combination ports for stacking. Follow the example below to enable stacking for a built-in port. To configure built-n port number 4 to function as a stacking port: DGS-3312SR:4#config stacking mode enable ports 4 Command: config stacking mode enable ports 4 The new stacking mode configuration must be saved and the system restarted to put the new settings into effect. If you do not save the changes now, they will be lost. Do you want to save the new system configuration to NV-RAM and restart now?(y/n) Success. DGS-3312SR:4# It is necessary to save the stacking mode settings and restart the system. If you want to save and restart press Y. It will take a few minutes for the system to reboot. show stacking Purpose Syntax Description Parameters Restrictions Used to display the current stacking mode. show stacking {mode} This command will display the current stacking configurations, and mode, if specified. mode − Displays the current stacking mode. None. Usage Example: 198