D-Link 3312SR Reference Manual - Page 115

DGS-3312SR Layer 3 Gigabit Switch DGS-3312SR:4#show vlan Command: show vlan VID : 1 VLAN Name VLAN TYPE : static Advertisement Member ports : 1:1-1:11,2:1-2:11 Static ports : 1:1-1:11,2:1-2:11 Untagged ports : 1:1-1:11,2:1-2:11 Forbidden ports : : default : Enabled VID : 2 VLAN TYPE : static Member ports : 1:12,2:12 Static ports : 1:12,2:12 Untagged ports : Forbidden ports : VLAN Name Advertisement : v1 : Disabled Total Entries : 2 DGS-3312SR:4# show gvrp Purpose Syntax Description Parameters Restrictions Used to display the GVRP status for a port list on the switch. show gvrp {} This command displays the GVRP status for a port list on the switch − Specifies a range of ports for which the GVRP status is to be displayed. The port list is specified by listing the lowest switch number and the beginning port number on that switch, separated by a colon. Then the highest switch number, and the highest port number of the range (also separated by a colon) are specified. The beginning and end of the port list range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 − in numerical order. None. Example usage: To display GVRP port status: 109