D-Link 3312SR Reference Manual - Page 277
delete ospf aggregation, the OSPF Area.
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
DGS-3312SR Layer 3 Gigabit Switch delete ospf aggregation Purpose Used to delete an OSPF area aggregation configuration. Syntax delete ospf aggregation lsdb_type summary Description This command is used to delete an OSPF area aggregation configuration. Parameters − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. − The 32-bit number in the form of an IP address that uniquely identifies the network that corresponds to the OSPF Area. lsdb_type summary − Specifies the type of address aggregation. Restrictions Only administrator-level users can issue this command. Usage Example To configure the OSPF area aggregation settings: DGS-3312SR:4#delete ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary Command: delete ospf aggregation 10.1.1.1 10.48.76..122/16 lsdb_type summary Success. DGS-3312SR:4# config ospf aggregation Purpose Used to configure the OSPF area aggregation settings. Syntax config ospf aggregation lsdb_type summary {advertise [enable | disable]} Description This command is used to configure the OSPF area aggregation settings. Parameters − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. − The 32-bit number in the form of an IP address that uniquely identifies the network that corresponds to the OSPF Area. lsdb_type summary − Specifies the type of address aggregation. advertise [enable | disable] − Allows for the advertisement trigger to be enabled or disabled. Restrictions Only administrator-level users can issue this command. 271