D-Link 3312SR Reference Manual - Page 131
IGMP Snooping Commands, config igmp_snooping
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
DGS-3312SR Layer 3 Gigabit Switch 19 IGMP SNOOPING COMMANDS The switch port commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config igmp_snooping config igmp_snooping querier enable igmp snooping disable igmp snooping config router_ports show router_ports show igmp_snooping show igmp_snooping group show igmp_snooping forwarding Parameters [ | all] {host_timeout | router_timeout | leave_timer state [enable | disable] [ | all] {query_interval | max_response_time | robustness_variable | last_member_query_interval | state [enable | disable] {forward_mcrouter_only} {} [add | delete] {vlan } {static | dynamic} {vlan} {vlan } {vlan } Each command is listed, in detail, in the following sections. NOTE: As a stand-alone switch or as a master switch in a switch stack, the switch number will be referred to as 15 for all configurations, graphs and tables. config igmp_snooping Purpose Used to configure IGMP snooping on the switch. Syntax config igmp_snooping [ | all] {host_timeout | router_timeout | leave_timer | state [enable | disable]} Description This command allows you to configure IGMP snooping on the switch. Parameters − The name of the VLAN for which IGMP snooping is to be configured. all - Selecting this parameter will configure IGMP snooping for all VLANs on the switch. host_timeout − Specifies the maximum amount of time a host can be a member of a multicast group 125
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/131.png)