D-Link 3312SR Reference Manual - Page 212
config sim, DGS-3312SR:4#config sim_group add 2, Command: config sim_group add 2, Success.
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
DGS-3312SR Layer 3 Gigabit Switch DGS-3312SR:4#config sim_group add 2 Command: config sim_group add 2 Please wait for ACK... SIM Config Success !!! Success. DGS-3312SR:4# To delete a member: DGS-3312SR:4#config sim delete 1 Command: config sim delete 1 Please wait for ACK... Success. DGS-3312SR:4# config sim Purpose Syntax Description Parameters Used to configure role parameters for the SIM protocol on the switch. config sim [{[ commander {group_name | candidate] | dp_interval | hold_time }] This command is used to configure parameters of switches of the SIM. commander - Use this parameter to configure the commander switch for the following parameters: group_name - Used to update the name of the group. Enter an alphanumeric string of up to 64 characters to rename the SIM group. dp_interval - The user may set the discovery protocol interval, in seconds that the switch will send out discovery packets. Returning information to the commander switch will include information about other switches connected to it. (Ex. MS, CaS). The user may set the discovery protocol interval from 30 to 90 seconds. hold time - Using this parameter, the user may set the time, in seconds, the switch will hold information sent to it from other switches, utilizing the discovery interval protocol. The user may set the hold time from 100 to 300 seconds. candidate - Used to change the role of a commander switch to a candidate switch. dp_interval - The user may set the discovery protocol interval, in seconds that the switch will send out discovery packets. Returning information to the commander switch will include information about other switches connected to it. (Ex. MS, CaS). The user may set the dp 206
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/212.png)