D-Link 3312SR Reference Manual - Page 252
config rip, enable rip
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
DGS-3312SR Layer 3 Gigabit Switch config rip Restrictions reception of RIP packets. v1_only − Specifies that only RIP v1 packets will be transmitted. v2_only - Specifies that only RIP v2 packets will be transmitted. v1_or_v2 - Specifies that only RIP v1 or v2 packets will be transmitted. state [enable | disable] − Allows RIP to be enabled and disabled on the switch. Only administrator-level users can issue this command. Example Usage: To change the RIP receive mode for the IP interface System: DGS-3312SR:4#config rip ipif System rx_mode v1_only Command: config rip ipif System rx_mode v1_only Success. DGS-3312SR:4# enable rip Purpose Syntax Description Parameters Restrictions Used to enable RIP. enable rip This command is used to enable RIP on the switch. none. Only administrator-level users can issue this command. Example Usage: To enable RIP: DGS-3312SR:4#enable rip Command: enable rip Success. DGS-3312SR:4# 246
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/252.png)