D-Link 3312SR Reference Manual - Page 238

DGS-3312SR Layer 3 Gigabit Switch Route Source RIP Static Local Metric 0 to 16777214 0 to 16777214 0 to 16777214 Metric Type mettype 1 mettype 2 mettype 1 mettype 2 mettype 1 mettype 2 Allowed Metric Type combinations are mettype 1 or mettype 2. The metric value 0 above will be redistributed in OSPF as the metric 20. Example Usage: To add route redistribution settings: DGS-3312SR:4#create route redistribute dst ospf src rip Command: create route redistribute dst ospf src rip Success. DGS-3312SR:4# create route redistribute dst rip src Purpose Used to add route redistribution settings for the exchange of OSPF routes to RIP routes on the switch. Syntax create route redistribute dst rip src {all | internal | external | type_1 | type_2 | inter+e1 | inter+e2}] {metric } Description This command will redistribute routing information between the OSPF and RIP routing protocols to all routers on the network that are running OSPF or RIP. Routing information entered into the Static Routing Table on the local DGS-3312SR switch is also redistributed Parameters src {all | internal | external | type_1 | type_2 | inter+e1 | inter+e2} − Allows the selection of the protocol of the source device. metric − Allows the entry of an OSPF interface cost. This is analogous to a HOP Count in the RIP routing protocol. Restrictions Only administrator-level users can issue this command. Routing information source − OSPF and the Static Route table. Routing information will be redistributed to RIP. The following table lists the allowed values for the routing metrics and the types (or forms) of the routing information that will be redistributed. Route Source OSPF Metric 0 to 16 Static 0 to 16 Type all type_1 type_2 inter+e1 inter+e2 external internal not applicable 232