D-Link 3312SR Reference Manual - Page 74
delete syslog host, show syslog host, Syslog Global State: Disabled
![]() |
UPC - 790069263873
View all D-Link 3312SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
DGS-3312SR Layer 3 Gigabit Switch delete syslog host Purpose Syntax Description Parameters Restrictions Used to remove a syslog host, that has been previously configured, from the switch. delete syslog host [ | all] The delete syslog host command is used to remove a syslog host that has been previously configured from the switch. − Specifies that the command will be applied to an index of hosts. There are four available indexes, numbered 1 through 4. all − Specifies that the command will be applied to all hosts. Only administrator-level users can issue this command. Example usage: To delete a previously configured syslog host: DGS-3312SR:4#delete syslog host 4 Command: delete syslog host 4 Success. DGS-3312SR:4# show syslog host Purpose Syntax Description Parameters Restrictions Used to display the syslog hosts currently configured on the switch. show syslog host {} The show syslog host command is used to display the syslog hosts that are currently configured on the switch. − Specifies that the command will be applied to an index of hosts. There are four available indexes, numbered 1 through 4. None. Example usage: To show syslog host information: DGS-3312SR:4#show syslog host Command: show syslog host Syslog Global State: Disabled Host Id Host IP Address Severity Facility 1 10.1.1.2 All Local0 2 10.40.2.3 All Local0 3 10.21.13.1 All Local0 UDP port Status 514 Disabled 514 Disabled 514 Disabled Total Entries : 3 DGS-3312SR:4# 68
![](/manual_guide/products/dlink-3312sr-reference-manual-4c3c9f4/74.png)