Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 109
sntp unicast client poll, sntp server
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Examples The following example enables the device to use Simple Network Time Protocol (SNTP) to request and accept SNTP traffic from servers. Console(config)# sntp unicast client enable sntp unicast client poll The sntp unicast client poll global configuration command enables polling for Simple Network Time Protocol (SNTP) predefined Unicast servers. To disable polling for SNTP clients, use the no form of this command. Syntax sntp unicast client poll no sntp unicast client poll Default Configuration Polling is disabled. Command Mode Global Configuration mode User Guidelines Polling time is determined by the sntp client poll timer global configuration command. Examples The following example enables polling for the Simple Network Time Protocol (SNTP) predefined unicast clients: Console(config)# sntp unicast client poll sntp server The sntp server global configuration command configures the device to use Simple Network Time Protocol (SNTP) to request and accept Simple Network Time Protocol (SNTP) traffic from a specified server. To remove a server from the list of SNTP servers, use the no form of this command. Syntax sntp server {ip-address | hostname}[poll] [key keyid] no sntp server ip-address • ip-address - IP address of the server. For information about defining a server on an Outof-Band interface, see the user guidelines. Clock 109