Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 391

Hello Time 2 sec Max hops 20 Max Age 20 sec Forward Delay 15 sec Console# show spanning-tree Spanning tree enabled mode MSTP Default port cost method: long ###### MST 0 Vlans Mapped: 1-9, 21-4094 CST Root ID Priority 32768 Address 00:01:42:97:e0:00 This switch is root for CST and IST master. Root Port 1 (g1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Max hops 20 spanning-tree pathcost method The spanning-tree pathcost method global configuration command sets the method by which path cost defaults are determined.. To return to the default setting, use the no form of this command. Syntax spanning-tree pathcost method {long | short} no spanning-tree pathcost method • long-Specifies 1 through 200,000,000 range for port path costs. • short-Specifies 1 through 65,535 range for port path costs. Default Configuration If the pathcost method is short, the default configuration is: • Ethernet (10 Mbps) - 100 • Fast Ethernet (100 Mbps) - 19 • Gigabit Ethernet (1000 Mbps) - 4 • Port-Channel - 4 Spanning-Tree Commands 391