Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 394
spanning-tree mst cost
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 394 highlights
www.dell.com | support.dell.com no spanning-tree mst instance-id port-priority • instance-ID-ID of the spanning -tree instance. (Range: 0-15) • priority-The port priority. (Range: 0 - 240 in multiples of 16) Default Configuration The default port-priority for IEEE MSTP is 128. Command Modes Interface Configuration (Ethernet, port-channel) mode User Guidelines There are no user guidelines for this command. Example The following example configures the port priority of port g1 to 142. Console (config)# interface ethernet g1 Console (config-if)# spanning-tree mst 1 port-priority 142 spanning-tree mst cost The spanning-tree mst cost interface configuration command configures the path cost for multiple spanning tree (MST) calculations. If a loop occurs, the spanning tree considers path cost when selecting an interface to put in the forwarding state. To return to the default port path cost, use the no form of this command. Syntax spanning-tree mst instance-id cost cost no spanning-tree mst instance-id cost • instance-ID-ID of the spanning -tree instance (Range: 1-15). • cost-The port path cost. (Range: 1 - 200,000,000) Default Configuration If the pathcost method is short, the default configuration is: • Ethernet (10 Mbps) - 100 • Fast Ethernet (100 Mbps) - 19 • Gigabit Ethernet (1000 Mbps) - 4 • Port-Channel - 4 394 Spanning-Tree Commands