Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 228
show ip dvmrp prune
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
www.dell.com | support.dell.com Example The following example displays the DVMRP routing table contents. Console# show ip dvmrp route Source Neighbor Interface Metric Expiry Up Time Time 171.68.0.0/16 192.168.1.28 eth g1 10 00:02:52 07:55:50 The following table describes the fields shown in the display: Field Source Neighbor Interface Metric Expiry time Up time Description The network address that identifies the sources for which this entry contains Multicast routing information. The upstream neighbor (for example, RPF neighbor) address from which IP datagrams from these sources are received. The interface on which IP datagrams sent by these sources are received. The distance in hops to the source subnet. The minimum amount of time remaining before this entry is aged out. The time since the route represented by this entry was learned by the router. show ip dvmrp prune The show ip dvmrp prune user EXEC command displays the Distance Vector Multicast Routing Protocol (DVMRP) upstream prune state. Syntax show ip dvmrp prune [group group-address source-address | source-address] • group-address-Multicast group IP address • source-address-The source IP address Default Configuration This command has no default configuration. Command Mode User EXEC mode 228 Multicast Routing Commands