Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 297
show qos map, wrr-queue cos-map
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 297 highlights
• queue-id-The queue number to which the following CoS values are mapped. • cos1...cosn-Map to specific queues up to eight CoS values from 0 to 7. Default Configuration The map default values are as follows: • CoS value 1 select queue 1 • CoS value 2 select queue 2 • CoS value 0 select queue 3 • CoS value 3 select queue 4 • CoS value 4 select queue 5 • CoS value 5 select queue 6 • CoS value 6 select queue 7 • CoS value 7 select queue 8 Command Mode Global Configuration mode User Guidelines You can use this command to distribute traffic into different queues, where each queue is configured with different weighted round robin (WRR) and Weighted Random Early Detection (WRED) parameters. You enable the expedite queues by using the priority-queue out interface configuration command wrr-queue cos-map. Example The following example maps CoS 3 to queue 7. Console (config)# wrr-queue cos-map 7 3 show qos map The show qos map user EXEC command displays all the QoS maps. Syntax show qos map [dscp-queue | tcp-port-queue | udp-port-queue | policed-dscp | dscpmutation] • dscp-queue-Displays the DSCP to queue map. • tcp-port-queue-Displays the TCP Port to queue map. • udp-port-queue-Displays the UDP Port to queue map. QoS Commands 297