Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 318
radius-server key
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 318 highlights
www.dell.com | support.dell.com If no host-specific timeout, retransmit, deadtime or key values are specified, the global values apply to each host. To define a radius server on the out-of-band port, use the out-of-band IP address format - oob/ip-address. Example The following example specifies a RADIUS server host with the following characteristics: • Server host IP address-192.168.10.1 • Authentication port number-20 • Timeout period-20 seconds Console (config)# radius-server host 192.168.10.1 auth-port 20 timeout 20 radius-server key The radius-server key global configuration command sets the authentication and encryption key for all RADIUS communications between the router and the RADIUS daemon. To reset to the default, use the no form of this command. Syntax radius-server key [key-string] no radius-server key • key-string-Specifies the authentication and encryption key for all RADIUS communications between the router and the RADIUS server. This key must match the encryption used on the RADIUS daemon. The key can be up to 128 characters long. Default Configuration The default is an empty string. Command Mode Global Configuration mode User Guidelines There are no user guidelines for this command. Example The following example sets the authentication and encryption key for all RADIUS communications between the device and the RADIUS daemon to "dell-server". Console (config)# radius-server key dell-server 318 Radius Commands