Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 370
spanning-tree forward-time
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 370 highlights
www.dell.com | support.dell.com User Guidelines There are no user guidelines for this command. Example The following example configures the spanning-tree protocol to RSTP. Console(config)# spanning-tree mode rstp spanning-tree forward-time The spanning-tree forward-time global configuration command configures the spanning-tree bridge forward time, which is the amount of time a port remains in the listening and learning states before entering the forwarding state. To reset the default forward time, use the no form of this command. Syntax spanning-tree forward-time seconds no spanning-tree forward-time • seconds-Time in seconds .(Range: 4 - 30) Default Configuration The default forwarding-time for IEEE Spanning-tree Protocol (STP) is 15 seconds. Command Modes Global Configuration mode User Guidelines There are no user guidelines for this command. Example The following example configures spanning-tree bridge forward time to 25 seconds. Console(config)# spanning-tree forward-time 25 spanning-tree hello-time The spanning-tree hello-time global configuration command configures the spanning-tree bridge hello time, which is how often the switch broadcasts hello messages to other switches.To reset the default hello time, use the no form of this command. 370 Spanning-Tree Commands