Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 325
rip passive-interface, rip auto-send, interface ip
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 325 highlights
User Guidelines There are no user guidelines for this command. Example The following example enables RIP on IP address 100.1.1.1. Console(config)# interface ip 100.1.1.1 Console(config-ip)# rip rip passive-interface The rip passive-interface interface configuration command disables the sending of routing updates on an interface. To re-enable the sending of routing updates, use the no form of this command. Syntax rip passive-interface no rip passive-interface Default Configuration Routing updates are sent. Command Mode IP Interface Configuration mode User Guidelines If the sending of routing updates on an interface is disabled, the particular subnet continues to be advertised to other interfaces, and updates from other routers on that interface continue to be received and processed. Example The following example disables the sending of routing updates on IP address 100.1.1.1. Console(config)# interface ip 100.1.1.1 Console(config-ip)# rip passive interface rip auto-send The rip auto-send interface configuration command automatically detects if RIP information is required to be sent on the interface. To disable the detection, use the no form of this command. Syntax rip auto-send no rip auto-send RIP Commands 325