Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 372
spanning-tree priority, spanning-tree disable
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 372 highlights
www.dell.com | support.dell.com spanning-tree priority The spanning-tree priority global configuration command configures the spanning-tree priority. The priority value is used to determine which bridge is elected as the root bridge. To reset the default spanning-tree priority use the no form of this command. Syntax spanning-tree priority priority no spanning-tree priority • priority-Priority of the bridge. (Range: 0 - 61440 in steps of 4096) Default Configuration The default bridge priority for IEEE STP is 32768. Command Modes Global Configuration mode User Guidelines The lower the priority, the more likely the bridge is to be the Root Bridge. Example The following example configures spanning-tree priority to 12288. Console(config)# spanning-tree priority 12288 spanning-tree disable The spanning-tree disable interface configuration command disables spanning-tree on a specific port. To enable spanning-tree on a port use, the no form of this command. Syntax spanning-tree disable no spanning-tree disable Default Configuration By default, all ports are enabled for spanning-tree. Command Modes Interface Configuration (Ethernet, port-channel) mode User Guidelines There are no user guidelines for this command. 372 Spanning-Tree Commands