Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 49
Using the CLI, CLI Command Modes, Introduction - console settings
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Using the CLI This chapter describes how to start using the CLI and describes implemented command editing features to assist in using the CLI. CLI Command Modes Introduction To assist in configuring devices, the CLI command-line interface is divided into different command modes. Each command mode has its own set of specific commands. Entering a question mark "?" at the system prompt (console prompt) displays a list of commands available for that particular command mode. From each mode a specific command is used to navigate from one command mode to another. The standard order to access the modes is as follows: User EXEC mode, Privileged EXEC mode, Global Configuration mode, and Interface Configuration mode. The following figure illustrates the command mode access path. User EXEC Mode Prompt: console> Enable Password Global ConfigurationMode Prompt: console(config)# Privileged Mode Prompt: console# Layer2 Interface Ethernet Prompt: console(config-if )# Interface VLAN Prompt: console(config-if )# Interface Port Channel Prompt: console(config-if )# Interface Range Ethernet Prompt: console(config-if )# Interface Range VLAN Prompt: console(config-if )# Interface Range Port Channel Prompt: console(config-if )# VLAN Database Prompt: console(config-vlan)# MST Prompt: console(config-mst)# Layer 3 Interface IP Prompt: console(config-ip)# OSPF Virtual Link Prompt: console(config-ip)# Management Interface OOB Ethernet IP Access List Prompt: console(config-oob)# Prompt: console(config-ip-al)# Management Access-List MAC List Prompt: console(config-macl)# Prompt: console(config-mac-al)# Line Class Map Prompt: console(config-line)# Prompt: console(config-cmap)# Key Key Chain Prompt: console(config-key)# Prompt: console(config-keychain)# Policy Map SSH Public Key Chain Prompt: console(config-pmap)# Prompt: console(config-pubkey- chain)# Interface OOB Ethernet Interface OOB Ethernet Prompt: console(config-pmap-c)# Prompt: console(config-pubkey- key)# Using the CLI 49