Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 62

www.dell.com | support.dell.com Example The following example configures the http authentication. Console (config)# ip http authentication radius local ip https authentication The ip https authentication global configuration command specifies authentication methods for https servers. To return to the default configuration, use the no form of this command. Syntax ip https authentication method1 [method2...] no ip https authentication • method1 [method2...]-Specify at least one from the following table: Keyword local none tacacs radius Source or destination Uses the local username database for authentication. Uses no authentication. Uses the list of all TACACS+ servers for authentication. Uses the list of all RADIUS servers for authentication. Default Configuration The local user database is checked. This has the same effect as the command ip https authentication local. Command Mode Global Configuration mode User Guidelines The additional methods of authentication are used only if the previous method returns an error, not if it fails. To ensure that the authentication succeeds even if all methods return an error, specify none as the final method in the command line. NOTE: Make sure that the given sequence of authentication methods is sensible. For example, a sequence where Radius follows None is not sensible because None requires no authentication and, therefore, the process will never require Radius authentication. Example The following example configures https authentication. Console (config)# ip https authentication radius local 62 AAA Commands