Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 474
show vrrp configuration, ethernet, port-channel
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 474 highlights
www.dell.com | support.dell.com Syntax show vrrp configuration [ethernet interface-number | vlan vlan-id | port-channel number] • ethernet interface-number-Ethernet port number. • vlan vlan-id-VLAN number. • port-channel number-Port-channel number. Default Configuration There are no user guidelines for this command. Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command. Example The following example displays the VRRP configuration. Console# show vrrp configuration Interface VRID State Address Priority Timer Auth Preempt Source-ip g1 down 10 1.1.1.99 100 1 No Yes 0.0.0.0 The following table describes the significant fields shown in the display: Field Description Interface Interface type and number. VRID Address Virtual Router Identifier. Virtual Router associated address. Priority Priority used for the virtual router master election. Timer The time interval, in seconds, between sending advertisement messages. Auth Displays if authentication is used. Preempt Displays whether a higher priority virtual router preempts a lower priority master. Source-ip Source IP address used in the VRRP messages. State Displays if the virtual router is up or down. 474 VRRP Commands