Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 202

www.dell.com | support.dell.com Command Mode Line Configuration (console) mode User Guidelines This command is available only on the console line. Although not saved to the configuration file, the line baud rate setting is permanently saved until it is explicitly modified. Examples The following example configures the line baud rate to 115200. Console (config)# line console Console(config-line)# speed 115200 exec-timeout The exec-timeout line configuration command sets the interval that the system waits until user input is detected. To restore the default setting, use the no form of this command. Syntax exec-timeout minutes [seconds] no exec-timeout • minutes-Integer that specifies the number of minutes. (Range: 0 - 65535) • seconds-Additional time intervals in seconds. (Range: 0 - 59) Default Configuration The default configuration is 10 minutes. Command Mode Line Configuration mode User Guidelines To specify no timeout, enter the exec-timeout 0 command. Examples The following example configures the interval that the system waits until user input is detected to 20 minutes. Console (config)# line console Console(config-line)# exec-timeout 20 202 Line Commands