Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 207

Management ACL management access-list The management access-list configuration command defines an access-list for management, and enters the access-list for configuration. Once in the access-list configuration mode, the denied or permitted access conditions are configured with the deny and permit commands. To remove an access list, use the no form of this command. Syntax management access-list name no management access-list name • name-The access list name using up to 32 characters. Default Configuration This command has no default configuration. Command Mode Global Configuration mode User Guidelines This command enters the access-list configuration mode, where the denied or permitted access conditions with the deny and permit commands must be defined. If no match criteria are defined the default is "deny". If reentering to an access-list context, the new rules are entered at the end of the access-list. Use the management access-class command to select the active access-list. The active management list cannot be updated or removed. Examples The following example shows how to create an access-list called "mlist", configure two management interfaces ethernet g1 and ethernet g9, and make the access-list the active list. Console (config)# management access-list mlist Console (config-macl)# permit ethernet g1 Console (config-macl)# permit ethernet g9 Console (config-macl)# exit Console (config)# management access-class mlist Management ACL 207