Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 94
port security routed secure-address
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
www.dell.com | support.dell.com Default Configuration Disabled - No port security Command Mode Interface Configuration (Ethernet, port-channel) mode User Guidelines There are no user guidelines for this command. Example In this example, frame forwarding is enabled without learning, and with traps sent every 100 seconds on port g1. Console (config)# interface ethernet g1 Console (config-if)# port security forward trap 100 port security routed secure-address The port security routed secure-address interface configuration command adds MAC-layer secure addresses to a routed port. Use the no form of this command to delete the MAC addresses. Syntax port security routed secure-address mac-address no port security routed secure-address mac-address • mac-address-Specify a MAC address. Default Configuration No addresses are defined. Command Mode Interface configuration (Ethernet, port-channel). Cannot be configured for a range of interfaces (range context). User Guidelines The command enables adding secure MAC addresses to a routed ports in port security mode. The command is available when the port is a routed port and in port security mode. The address is deleted if the port exits the security mode or is not a routed port. 94 Address Table Commands