Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 60

www.dell.com | support.dell.com Syntax login authentication {default | list-name} no login authentication • default-Uses the default list created with the authentication login command. • list-name-Uses the indicated list created with the authentication login command. Default Configuration Uses the default set with the command authentication login. Command Mode Line Configuration mode User Guidelines Changing login authentication from default to another value may disconnect the telnet session. Example The following example specifies the default authentication method for a remote Telnet or console. Console (config)# line console Console (config-line)# login authentication default enable authentication The enable authentication line configuration command specifies the authentication method list when accessing a higher privilege level from a remote telnet or console. To return to the default specified by the enable authentication command, use the no form of this command. Syntax enable authentication {default | list-name} no enable authentication • default-Uses the default list created with the authentication enable command. • list-name-Uses the indicated list created with the authentication enable command. Default Configuration Uses the default set with the command authentication enable. Command Mode Line Configuration mode 60 AAA Commands