Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 219
ip igmp static-group, show ip mroute, Interface configuration Ethernet, VLAN, port-channel
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
ip igmp static-group The ip igmp static-group interface configuration command configures the router to be a statically connected member of the specified group on the interface. To remove the router as a member of the group, use the no form of this command. Syntax ip igmp static-group group-address no ip igmp static-group group-address • group-address-IP Multicast address of a group to which the router belongs. Default Configuration The router is not a member of a group. Command Mode Interface configuration (Ethernet, VLAN, port-channel) User Guidelines There are no user guidelines for this command. Example The following example configures the router to be a statically connected member of the specified group on port g5 with IP address 224.0.0.0. Console (config)# interface ethernet g5 Console (config-if)# ip igmp static-group 224.0.0.0 show ip mroute The show ip mroute user EXEC command displays the IP Multicast routing table contents. Syntax show ip mroute [group group-address] [source source-address] [ethernet interface-number | vlan vlan-id | port-channel number] • group group-address-Multicast group IP address. • source source-address-The source IP address. • ethernet interface-number-Ethernet port number. • vlan vlan-id-VLAN number. • port-channel number-Port-channel number. Multicast Routing Commands 219