Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 365
snmp-server v3-host, is filtered. Range: 1-30 characters
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 365 highlights
snmp-server v3-host The snmp-server v3-host global configuration command specifies the recipient of Simple Network Management Protocol Version 3 notifications. To remove the specified host, use the no form of this command. Syntax snmp-server v3-host {ip-address | hostname} username [traps | informs] {noauth | auth | priv} [udp-port port] [filter filtername] [timeout seconds] [retries retries] no snmp-server v3-host {ip-address | hostname} username [traps | informs] • ip-address-Specifies the IP address of the host (targeted recipient). For information about specifying an out-of-band IP address, see the user guidelines. • hostname-Specifies the name of the host. (Range:1-158 characters) • username-Specifies the name of the user to use to generate the notification. (Range: 1-24) • traps-Indicates that SNMP traps are sent to this host. • informs-Indicates that SNMP informs are sent to this host. • noauth-Indicates no authentication of a packet. • auth-Indicates authentication of a packet without encrypting it. • priv-Indicates authentication of a packet with encryption. • port-Specifies the UDP port of the host to use. (Range: 1-65535) • filtername-Specifies a string that defines the filter for this host. If unspecified, nothing is filtered. (Range: 1-30 characters) • seconds-Specifies the number of seconds to wait for an acknowledgment before resending informs. (Range: 1-300) • retries-Specifies the maximum number of times to resend an inform request. (Range: 0-255) Default Configuration • The default UDP port of the host to use is 162. • The default timeout period to wait for an acknowedgement before resending informs is 15 seconds. • The default maximum number of times to resend an inform request is 3. Command Mode Global Configuration mode SNMP Commands 365