Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 140
show interfaces status, Displays the Flow Control status.
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
www.dell.com | support.dell.com The displayed port configuration information includes the following: • Port-The port number. • Port Type-The port designated IEEE shorthand identifier. For example 1000Base-T refers to 1000 Mbps baseband signaling inluding both Tx and Rx transmissions. • Duplex-Displays the port Duplex status. • Speed-Refers to the port speed. • Neg-Describes the Auto-negotiation status. • Flow Control-Displays the Flow Control status. • Back Pressure-Displays the Back Pressure status. • MDIX Mode-Displays the Auto-crossover status. • Admin State-Displays whether the port is enabled or disabled. show interfaces status The show interfaces status user EXEC command displays the status for all configured interfaces. Syntax show interfaces status [ethernet interface | port-channel port-channel-number | oob-eth oobinterface] • interface-A valid Ethernet port. • port-channel-number-A valid port-channel trunk index. • oob-interface-Out-of-Band Ethernet port number. Default Configuration This command has no default configuration. Command Mode Privilege EXEC mode User Guidelines There are no user guidelines for this command. Example The following example displays the status for all configured interfaces. 140 Ethernet Configuration Commands