Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 493
dot1x timeout supp-timeout, interface ethernet, dot1x max-req
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 493 highlights
Command Mode Interface Configuration (Ethernet) mode User Guidelines The default value of this command should only be changed to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients and authentication servers. Examples The following example sets the number of times that the device sends an EAP-request/identity frame to 6:. Console(config)# interface ethernet g16 Console(config-if)# dot1x max-req 6 dot1x timeout supp-timeout The dot1x timeout supp-timeout interface configuration command sets the time that the device waits for a response before retransmitting an Extensible Authentication Protocol (EAP)-request frame to the client. To return to the default setting, use the no form of this command. Syntax dot1x timeout supp-timeout seconds no dot1x timeout supp-timeout • seconds - Time in seconds that the device should wait for a response to an EAP-request frame from the client before resending the request. (Range: 1 - 65535) Default Configuration The period of time is set to 30 seconds. Command Mode Interface Configuration (Ethernet) mode User Guidelines The default value of this command should be changed only to adjust for unusual circumstances, such as unreliable links or specific behavioral problems with certain clients and authentication servers. 802.1x Commands 493