Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 34
IP Routing
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
www.dell.com | support.dell.com ip domain-name ip name-server ip host clear host clear host dhcp show hosts Defines a default domain name to complete unqualified host names. GC Configures available name servers GC Configures static host name-to-address mapping in the host cache GC Deletes entries from the host name-to-address cache PE Deletes entries from the DHCP host name-to-address mapping cache PE Displays the default domain name, a list of name server hosts, static PE and cached list of host names and addresses. IP Routing Command Group interface ip ip route key-chain key (key chain) key (global) key-string accept-lifetime send-lifetime ip maximum-paths show ip route show ip protocols show key-chains show keys Description Configures an IP interface and enters the IP interface configuration mode. Establishes static IP routes on the device. Defines authentication key group for routing protocols. Defines an authentication key on a key chain. Creates an authentication key on the device. Specifies an authentication string for a key. Sets the time period during which the authentication key on a key chain is valid to be received. Sets the time period during which an authentication key on a key chain is valid for sending. Defines the maximum number of parallel routes. Displays the routing table current state. Displays the parameters and current state of the active routing protocols. Displays key-chains information on the device. Displays key information. Mode GC GC GC KC GC KE KC KC GC UE PE PE PE 34 Command Groups