Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 240
authentication
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
www.dell.com | support.dell.com If the delay is not added before transmission over a link, the time in which the LSA propagates over the link is not considered. This setting has more significance on very lowspeed links. Example The following example sets the estimated time required to send a link-state update packet on the OSPF virtual link interface to 10 seconds. Console (config)# router ospf area 1.1.1.1 virtual-link 1.1.1.1 Console# (config-vlink)# transmit-delay 10 authentication The authentication ospf virtual link interface configuration command enables authentication for OSPF packets and specifies the type of authentication. To prevent authentication, use the no form of this command. Syntax authentication {text text | md5 name-of-chain} no authentication • text text-Clears text authentication. The string can contain from 1 to 8 uppercase and lowercase alphanumeric characters. • md5 name-of-chain-Keyed Message Digest 5 (MD5) authentication. Default Configuration No authentication is provided for OSPF packets. Command Mode OSPF virtual link configuration User Guidelines There are no user guidelines for this command. Example The following example enables authentication for OSPF packets as MD5 with chain name of "hhv". Console (config)# router ospf area 1.1.1.1 virtual-link 1.1.1.1 Console# (config-vlink)# authentication md5 hhv 240 OSPF Commands