Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 214
ip dvmrp metric, ip igmp
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
www.dell.com | support.dell.com User Guidelines If DVMRP is disabled on an interface, the DVMRP parameters on the interface return to the default values. Example The following example enables DVMRP on port g5. Console (config)# interface ethernet g5 Console (config-if)# ip dvmrp ip dvmrp metric The ip dvmrp metric interface configuration mode configures the interface metric for Distance Vector Multicast Routing Protocol (DVMRP) reports. To return to the default, use the no form of this command. Syntax ip dvmrp metric metric no ip dvmrp metric • metric-Metric for DVMRP reports. (Range: 1 - 31) Default Configuration The default metric value is 1. Command Mode Interface configuration (Ethernet, VLAN, port-channel) User Guidelines If DVMRP is disabled on an interface, the DVMRP parameters on the interface return to default. This command is available only when DVMRP is enabled. Example The following example configures the interface metric for DVMRP on port g5 to 15. Console (config)# interface ethernet g5 Console (config-if)# ip dvmrp metric 15 ip igmp The ip igmp interface configuration command enables IGMP on an interface. To disable IGMP on an interface, use the no form of this command. 214 Multicast Routing Commands