Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 473
vrrp preempt, show vrrp configuration
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 473 highlights
Command Mode Interface configuration (Ethernet, VLAN, port-channel) User Guidelines This command cannot be used with a range of ports. Example The following example enables authentication for the VRRP number 45 with the password "Dell" on g8. Console(config)# interface ethernet g8 Console(config-if)# vrrp 45 authentication Dell vrrp preempt The vrrp preempt interface configuration command enables the Virtual Router Redundancy Protocol (VRRP) preemption on an interface. To disable preemption, use the no form of this command. Syntax vrrp virtual-router preempt no vrrp virtual-router preempt • virtual-router-Virtual router number. (Range: 1 - 255) Default Configuration VRRP preemption is enabled. Command Mode Interface configuration (Ethernet, VLAN, port-channel) User Guidelines An exception is that the router that owns the IP address(es) associated with the virtual router always preempts independent of the setting of this command. Example The following example enables VRRP preemption on g8. Console(config)# interface ethernet g8 Console(config-if)# vrrp 45 preempt show vrrp configuration The show vrrp configuration privileged EXEC command displays the Virtual Router Redundancy Protocol (VRRP) configuration. VRRP Commands 473