Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 130
interface out-of-band-eth
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
www.dell.com | support.dell.com Command Mode Global Configuration mode User Guidelines Commands under the interface range context are executed independently on each active interface in the range. If the command returns an error on one of the active interfaces, it does not stop executing commands on other active interfaces. Example The following example shows how ports g18 to g20 and ports g22 to g24 are grouped to receive the same command. Console(config)# interface range ethernet g18-20, g22-24 Console(config-if)# interface out-of-band-eth The interface out-of-band-eth global configuration command configures the Out-of-Band Ethernet port and enter interface configuration mode. interface out-of-band-eth [interface] • interface-Interface number. If unspecified defaults to 1. Default Configuration The interface is enabled. Command Mode Global Configuration mode User Guidelines The following commands are available on interface Out-of-Band-eth mode: shutdown, description, speed, duplex, negotiation, flowcontrol, ip Examples The following example enters Out-of-Band Ethernet interface configuration mode. Console(config)# interface out-of-band-eth Console(config-oob)# 130 Ethernet Configuration Commands