Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 223
show ip dvmrp interface, Port-channel number.
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
The following table describes the fields shown in the display: Field Group Source Interface Up time Expiry time State Owner Description IP Multicast group address. The network address that identifies the sources. The outgoing interface. The time since the Multicast routing information was learned by the router. The minimum amount of time remaining before this entry is aged out. If the state is pruned, the remaining time until the prune expires and the state reverts to forwarding. Otherwise, the remaining time until this entry is removed from the table. An indication of whether the outgoing interface and next-hop represented by this entry is currently being used to forward IP datagrams, or is currently pruned. The routing mechanism via which this next-hop was learned. show ip dvmrp interface The show ip dvmrp interface user EXEC command displays DVMRP interface information. Syntax show ip dvmrp interface [ethernet interface-number | vlan vlan-id | port-channel number] • ethernet interface-number-Ethernet port number. • vlan vlan-id-VLAN number. • port-channel number-Port-channel number. Default Configuration This command has no default configuration. Command Mode User EXEC mode User Guidelines There are no user guidelines for this command. Multicast Routing Commands 223