Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 162
arp
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
www.dell.com | support.dell.com Syntax show ip interface [ethernet interface-number | vlan vlan-id | port-channel number | out-ofband-eth oob-interface]] • ethernet interface-number-Ethernet port number. • vlan vlan-id-VLAN number. • port-channel number-Port-channel number. • out-of-band-eth oob-interface-Out-of-band Ethernet port number. Default Configuration This command has no default configuration. Command Mode User EXEC mode User Guidelines There are no user guidelines for this command. Example The following example displays VLAN 1 configuration. Console# show ip interface vlan 1 arp The arp global configuration command adds a permanent entry in the Address Resolution Protocol (ARP) cache. To remove an entry from the ARP cache, use the no form of this command. Syntax arp ip_addr hw_addr {ethernet interface-number | vlan vlan-id | port-channel number} no arp ip_addr {ethernet interface-number | vlan vlan-id | port-channel number} • ip_addr-IP address or IP alias to map to the specified MAC address. • hw_addr-MAC address to map to the specified IP address or IP alias. • ethernet interface-number-Ethernet port number. • vlan vlan-id-VLAN number. • port-channel number-Port-channel number. Default Configuration By default, ARP is disabled. 162 IP Addressing Commands