Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 320
radius-server timeout, radius-server deadtime
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 320 highlights
www.dell.com | support.dell.com User Guidelines To define an out-of-band IP address, use the out-of-band IP address format -oob/ip-address. Example The following example configures the source IP address used for communication with RADIUS servers to 10.1.1.1. Console (config)# radius-server source-ip 10.1.1.1 radius-server timeout The radius-server timeout global configuration command sets the interval for which a router waits for a server host to reply. To restore the default, use the no form of this command. Syntax radius-server timeout timeout no radius-server timeout • timeout-Specifies the timeout value in seconds. (Range: 1 - 30) Default Configuration The default value is 3 seconds. Command Mode Global Configuration mode User Guidelines There are no user guidelines for this command. Example The following example sets the interval for which a router waits for a server host to reply to 5 seconds. Console (config)# radius-server timeout 5 radius-server deadtime The radius-server deadtime global configuration command improves RADIUS response times when servers are unavailable. The command is used to cause the unavailable servers to be skipped. To reset the default value, use the no form of this command. Syntax radius-server deadtime deadtime no radius-server deadtime 320 Radius Commands