Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 190
ip maximum-paths
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
www.dell.com | support.dell.com • seconds-Length of time (in seconds) that the key is valid to be sent. (Range: 1 - 4294967295) Default Configuration There is no time limit, the key is always valid to be sent. Command Mode Key configuration User Guidelines If the last key expires, authentication stops and an error message is generated. Example The following example specifies for key 1, a send-lifetime range from 14:00:00 Jan 25 2005 for 3600 seconds, and for key 2 a send-lifetime range from 15:00:00 Jan 25 2005 for 3600 seconds. Console (config)# key 1 Console (config-key)# key-string mountain Console (config-key)# send-lifetime 14:00:00 Jan 25 2005 duration 3600 Console (config-key)# exit Console (config)# key 2 Console (config-key)# key-string country Console (config-key)# send-lifetime 15:00:00 Jan 25 2005 duration 3600 ip maximum-paths The ip maximum-paths global configuration command defines the maximum number of parallel routes. To restore the default number of parallel routes, use the no form of this command. Syntax ip maximum-paths number-paths no ip maximum-paths • number-paths-Maximum number of parallel routes installed in a routing table. (Range: 1 - 4) Default Configuration The default number of parallel routes is 4. 190 IP Routing Protocol-Independent Commands