Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 353
snmp-server group, included
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 353 highlights
Until the first wildcard, no attempt is made to verify that the MIB node corresponds to the starting portion of the OID. Examples The following example creates a view that includes all objects in the MIB-II system group except for sysServices (System 7) and all objects for interface 1 in the MIB-II interface group. Console (config)# snmp-server view user-view system included Console (config)# snmp-server view user-view system.7 excluded Console (config)# snmp-server view user-view ifEntry.*.1 included snmp-server group The snmp-server group global configuration command configures a new Simple Management Protocol (SNMP) group or a table that maps SNMP users to SNMP views. To remove a specified SNMP group, use the no form of this command. Syntax snmp-server group groupname {v1 | v2 | v3 {noauth | auth | priv} [notify notifyview ] } [context name] [read readview] [write writeview] no snmp-server group groupname {v1 | v2 | v3 {noauth | auth | priv} [notify notifyview ] } [context name] • groupname-Specifies the name of the group. • v1-Indicates the SNMP Version 1 security model. • v2-Indicates the SNMP Version 2 security model. • v3-Indicates the SNMP Version 3 security model. • noauth-Indicates no authentication of a packet. Applicable only to the SNMP Version 3 security model. • auth-Indicates authentication of a packet without encrypting it. Applicable only to the SNMP Version 3 security model. • priv-Indicates authentication of a packet with encryption. Applicable only to the SNMP Version 3 security model. • name-Specifies the context of a packet. The following contexts are supported: router and oob. If the context name is unspecified, all contexts are defined. • readview-Specifies a string that is the name of the view that enables only viewing the contents of the agent. If unspecified, all objects except for the community-table and SNMPv3 user and access tables are available. (Range: 1-30 characters) SNMP Commands 353