Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 497

Max req Supplicant timeout Server timeout Session Time MAC address Authentication Method Termination Cause State Authentication success Authentication fails The maximum number of times that the device sends an Extensible Authentication Protocol (EAP)-request frame (assuming that no response is received) to the client before restarting the authentication process. Time in seconds the device waits for a response to an EAP-request frame from the client before resending the request. Time in seconds the device waits for a response from the authentication server before resending the request. How long the user is logged in. The supplicant MAC address. The authentication method used to establish the session. The reason for the session termination. The current value of the Authenticator PAE state machine and of the Backend state machine. Counts the number of times the state machine has received Success message from the Authentication Server. Counts the number of times the state machine has received Failure message from the Authentication Server. show dot1x users The show dot1x users privileged EXEC command displays 802.1x users for the device. Syntax show dot1x users [username username] • username - Supplicant username (Range: 1- 160 characters) Default Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines There are no user guidelines for this command. 802.1x Commands 497