Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 472
vrrp source-ip, vrrp authentication
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 472 highlights
www.dell.com | support.dell.com vrrp source-ip The vrrp source-ip interface configuration command defines the source IP address used for Virtual Router Redundancy Protocol (VRRP) messages on an interface. To return to default IP address, use the no form of this command. Syntax vrrp virtual-router source-ip ip-address no vrrp virtual-router source-ip • virtual-router-Virtual router number. (Range: 1 - 255) • ip-address-IP address used for VRRP communication. Default Configuration The default VRRP message is the VRRP with the lowest IP address. Command Mode Interface configuration (Ethernet, VLAN, port-channel) User Guidelines This command cannot be used with a range of ports. Example The following example defines the source IP address 168.192.1.1 for VRRP messages on g8. Console(config)# interface ethernet g8 Console(config-if)# vrrp 45 source-ip 168.192.1.1 vrrp authentication The vrrp authentication interface configuration command enables authentication for the Virtual Router Redundancy Protocol (VRRP) on an interface. To disable authentication, use the no form of this command. Syntax vrrp virtual-router authentication text no vrrp virtual-router authentication • virtual-router-Virtual router number. (Range: 1 - 255) • text-Password up to 8 characters. Default Configuration VRRP authentication default is disabled. 472 VRRP Commands