Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 278
channel-group
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 278 highlights
www.dell.com | support.dell.com Default Configuration This command has no default configuration. Command Mode Global Configuration mode User Guidelines Commands under the interface range context are executed independently on each interface in the range. If the command returns an error on one of the interfaces, it stops the execution of the command on subsequent interfaces. Example The following example shows how port-channels 1, 2 and 8 are grouped to receive the same command. Console (config)# interface range port-channel 1-2, 8 Console (config-if)# channel-group The channel-group interface configuration command associates a port with a port-channel. To remove a port from a port channel, use the no form of this command. Syntax channel-group port-channel-number mode {on | auto} no channel-group • port-channel_number-Specifies the number of the valid port-channel for the current port to join. • on-Forces the port to join a channel. • auto-Allows the port to join a channel as a result of an LACP operation. Default Configuration The port is not assigned to any port-channel. Command Mode Interface Configuration (Ethernet) mode User Guidelines Turning off auto-negotiation on an aggregate link may, under some circumstances make it non operational. If the other side has auto-negotiation turned on, it may re-synchronize all 278 Port Channel Commands