Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 439
TACACS+ Commands, tacacs-server host
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 439 highlights
TACACS+ Commands tacacs-server host The tacacs-server host global configuration command specifies a TACACS+ server host. To delete the specified hostname or IP address, use the no form of this command. Syntax tacacs-server host {ip-address | hostname} [single-connection] [port port-number] [timeout timeout] [key key-string] [source source] [priority priority] no tacacs-server host {ip-address | hostname} • ip-address-The IP address of the TACACS+ server. • hostname-The hostname of the TACACS+ server (Range: 1-158 characters). • single-connection-Specify single-connection to maintain a single open connection between the device and the TACACS+ daemon. • port-number-The TACACS+ server port number. If unspecified, the port number defaults to 49 (Range: 0-65535). • timeout-The timeout value in seconds. If no timeout value is specified, the global value is used (Range: 1-30). • key-string-The authentication and encryption key for all TACACS communications between the device and the TACACS+ server. This key must match the encryption used on the TACACS+ daemon. If no key value is specified, the global value is used. Type "" to specify an empty string (Range: 0-128). • source-The source IP address to use for communication. If no source IP value is specified, the global value is used. Specify 0.0.0.0 to use the IP address of the outgoing interface. See the user guidelines for information on specifying an out-of-band IP address. • priority-Determines the order in which the servers are used, where 0 is the highest priority. (Range: 0-65535) Default Configuration No TACACS+ host is specified. Command Mode Global Configuration mode User Guidelines To specify multiple hosts, multiple tacacs-server host global configuration commands can be used. TACACS+ Commands 439