Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 67

no passwords aging enable-password level • name-The name of the user (Range: 1-20 characters). • level-The user level (Range: 1 -15). • days-The number of days before a password expires (Range: 1-365). ·Default Configuration No password expiration time. Command Mode Global Configuration mode User Guidelines The password expiration date is calculated from the day the password is defined, and not from the day aging time is defined. Ten days before the password expiration date, the user receives a Syslog warning to change the password within "n" days. These warnings continue until the password expiration date. After the password expiration date, the user receives three chances to log in and change the password. If the user still does not change the password, the account is locked. Example The following example configures the password expiration time of username "bob" to 120 days. Console (config)# passwords aging username bob 120 passwords history The passwords history global configuration command configures the number of required password changes before a password in the local database can be reused. To remove this requirement,use the no form of this command. Syntax passwords history number no passwords history • number-Indicates the required number of password changes before the password can be reused. (Range: 1-10) Default Configuration No required number of password changes before reusing a password. AAA Commands 67