Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 469
VRRP Commands, vrrp ip
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 469 highlights
VRRP Commands vrrp ip The vrrp ip interface configuration command defines Virtual Router Redundancy Protocol (VRRP) for an interface. To delete the definition, use the no form of this command. Syntax vrrp virtual-router ip ip-address [ip-address2...ip-address8] no vrrp virtual-router ip • virtual-router-Virtual router number on the interface for which VRRP is being defined. (Range: 1 - 255) • ip-address-Virtual router IP address. Up to 8 IP addresses can be defined in one command line. One IP address is required. Default Configuration No Virtual Router is defined. Command Mode Interface configuration (Ethernet, VLAN, port-channel) User Guidelines This command cannot be used with a range of ports. Example The following example defines VRRP with the IP address 172.16.1.1 and 172.16.2.1 for port g8. Console(config)# interface ethernet g8 Console(config-if)# vrrp 19 ip 172.16.1.1 172.16.2.1 vrrp up The vrrp up interface configuration command activates Virtual Router Redundancy Protocol (VRRP) on an interface. To disable VRRP, use the no form of this command. Syntax vrrp virtual-router up no vrrp virtual-router up • virtual-router-Virtual router number on the interface for which VRRP is being activated. (Range: 1 - 255) VRRP Commands 469