Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 171
ip name-server, ip host, ip domain-name
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
User Guidelines There are no user guidelines for this command. Example The following example defines a default domain name of dell.com: Console(config)# ip domain-name dell.com ip name-server The ip name-server global configuration command defines available name servers. To delete a name server, use the no form of this command. Syntax ip name-server server-address1 [server-address2 ... server-address8] no ip name-server [server-address1 ... server-address8] • server-address-IP addresses of the name server. For information about specifying an Outof-Band IP address, see the user guidelines. Default Configuration No name server IP addresses are specified. Command Mode Global Configuraton mode User Guidelines Server preference is determined by entry order. Up to 8 servers can be defined in one command or by using multiple commands. To define a radius server on the out-of-band port, use the out-of-band IP address format: oob/ip-address. Example The following example sets the available name server: Console(config)# ip name-server 176.16.1.18 ip host The ip host global configuration command defines static host name-to-address mapping in the host cache. To delete the name-to-address mapping, use the no form of this command. IP Addressing Commands 171