Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 363

The default maximum number of times to resend an inform request is 3. Command Mode Global Configuration mode User Guidelines When configuring an SNMPv1 or SNMPv2 notification recipient, a notification view for that recipient is automatically generated for all the MIB. When configuring an SNMPv1 notification recipient, the Inform option cannot be selected. If a trap and inform are defined on the same target, and an inform was sent, the trap is not sent. To define an SNMP recipient on the out-of-band port, use the out-of-band IP address format oob/ip-address. Example The following example enables SNMP traps for host 10.1.1.1 with community string "management" using SNMPv2. Console (config)# snmp-server host 10.1.1.1 management 2 SNMPv3 Commands snmp-server user The snmp-server user global configuration command configures a new SNMP Version 3 user. To delete a user, use the no form of this command. Syntax snmp-server user username groupname [remote engineid-string] [ auth-md5 password | authsha password | auth-md5-key md5-des-keys | auth-sha-key sha-des-keys ] no snmp-server user username [remote engineid-string] • username-Specifies the name of the user on the host that connects to the agent. (Range: 1-30 characters) • groupname-Specifies the name of the group to which the user belongs. (Range: 1-30 characters) • engineid-string-Specifies the engine ID of the remote SNMP entity to which the user belongs. The engine ID is a concatenated hexadecimal string. Each byte in the hexadecimal character string is two hexadecimal digits. Each byte can be separated by a period or colon. If the engine ID is not specified, the local engine ID is used. (Range: 5-32 characters) SNMP Commands 363