Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 310
class, IP/MAC list ACL.
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 310 highlights
www.dell.com | support.dell.com Example The following example displays all policy-maps. Console> show policy-map Policy Map policy1 class class1 set dscp 7 Policy Map policy2 class class2 police 96000 4800 exceed-action drop class class3 police 124000 96000 exceed-action policed-dscp-transmit class The class policy-map configuration command defines the traffic classification and enters the policy-map class configuration mode. To delete the class map, use the no form of this command. Syntax class class-map-name [access-group acl-name] no class class-map-name • class-map-name-Specifies a class-map name. • access-group-If a new class is created, the acl-name specifies the name of the access IP/MAC list ACL. Default Configuration By default, no policy-map class-maps are defined. Command Mode Policy-map Configuration mode User Guidelines Use the policy-map global configuration command to identify the policy-map and to enter Policy-map Configuration mode before using the class command. After specifying a policymap, a policy for new classes can be configured or a policy for any existing classes in that policy-map can be modified. Attach the policy-map to an interface by using the service-policy interface configuration command. Use an existing class-map to attach the classification 310 QoS Commands