Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 290
show qos interface
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
www.dell.com | support.dell.com Example The following example defines the wrr-queue mechanism on an egress queue to tail-drop. Console (config)# interface ethernet g5 Console (config-if)# wrr-queue tail-drop show qos interface The show qos interface user EXEC command displays interface QoS data. Syntax show qos interface [ethernet interface-number | vlan vlan-id | port-channel number] [buffers | queuing | policers | shapers] • ethernet interface-number-Ethernet port number. • vlan vlan-id-VLAN number. • port-channel number-Port-channel. • buffers-Displays buffer setting for the interface queues. For gigabit Ethernet interfaces, the queue depth for each of the 8 queues and the thresholds for the WRED/Tail Drop are displayed. For 10/100 interfaces the minimum reserved settings are displayed. • queuing-Displays the queue strategy (WRR or EF), the weight for WRR queues, the CoS to queue map and the EF priority. • shapers-Displays the specified interface shaper and the shaper for the queue on the specified interface. • policers-Displays all the policers configured for this interface, their setting, and the number of policers currently unused. Default Configuration For VLAN interface only the policers option is relevant. If no keyword is specified with the show qos interface command, the port QoS mode, default CoS value, DSCP-to-DSCP-mutation map (if any) attached to the port, and policy map (if any) attached to the interface are displayed. If a specific interface is not specified, the information for all interfaces is displayed. Command Mode User EXEC mode User Guidelines There are no user guidelines for this command. 290 QoS Commands